
The FreshIN 3.0 FCI is a high-end inverter air conditioner featuring a fresh air supply function of up to 60 m³/h and advanced purification via QuadruPuri four-stage filtration. FreshIN+ technology ensures optimal oxygen levels in the room, while FreshIN+ Silent mode reduces noise by up to 17% for maximum comfort. Air quality is displayed in real time thanks to a TVOC sensor. Intelligent technologies such as Smart Gentle Wind, Smart Vector Airflow, the Coanda effect, and I Feel create a balanced microclimate without direct airflow. With built-in Wi-Fi control, IoT support, and voice commands, the air conditioner offers full control, even without an internet connection.
The model has a cooling capacity of 3500 W and a heating capacity of 3600 W, with a SEER of 8.5 and a SCOP of 4.6, achieving energy efficiency ratings of A+++ for cooling and A++ for heating. It is suitable for rooms up to 40 m² and maintains temperature balance by pre-heating/cooling the incoming air with an accuracy of ±0.5°C. It features 7 fan speeds, an ultra-quiet mode of 16 dB during fresh air supply, and a range of additional modes: self-cleaning of the indoor and outdoor units, ECO mode, Super Turbo Start, generator mode, light-sensitive night mode, self-diagnosis, louver memory, low-temperature mode, +8°C mode, anti-cold start function, and more.
The inverter compressor with R32 refrigerant ensures eco-friendly and economical operation. The design is safe, featuring dual drainage and protection against condensation on the electronics. Thanks to the optimized “3-Easy” concept, installation and maintenance are simplified by up to 30%. The display features LED lighting, and the remote control is backlit. FreshIN 3.0 air conditioners are an excellent choice for bedrooms, children’s rooms, and spaces requiring a high standard of comfort and air quality.
- Rated capacity: 12,000 BTU
- Cooling power: 3500 W (range 150–4200 W)
- Heating power: 3600 W (range 150–5200 W)
- Energy class (cooling): A+++
-Heating
energyclass: A++
- SEER: 8.5
- SCOP: 4.6
- Cooling power consumption: 900 W (75–1850 W)
- Heating - power consumption: 810 W (75–2000 W)
- Operating current during cooling: 4.1 A (0.5–8.6 A)
- Operating current during heating: 3.7 A (0.5–9.0 A)
- Power supply: 220–240 V / 50 Hz / 1-phase
-Fresh air
flow rate: up to 60 m³/h
- Airflow (indoor unit): 650 / 580 / 500 / 370 / 250 m³/h
- Airflow (outdoor unit): 1700 m³/h
- Indoor unit noise level: 22 / 31 / 36 / 41 / 44 dB
- Noise level in FreshIN+ Silent mode: 16 dB
- Outdoor unit noise level: 52 dB
- Dehumidification: 1.2 L/h
- Refrigerant: R32
- Compressor type: Inverter
- Condenser type: Single fan
- Suitable cooling area: up to 40 m²
- Suitable heating area: up to 40 m²
- Control type: Remote + Wi-Fi
- Wi-Fi module: Built-in
- App: TCL Home
- Voice control
- IoT control
- Filtration: QuadruPuri - 4 stages
- Air quality sensor: TVOC
- Air quality display
- FreshIN+ function
- FreshIN+ Silent function
- Smart Gentle Wind function
- Smart Vector Airflow function
- Coanda effect function
- Temperature balance with fresh air: ±0.5°C
- Self-cleaning mode (indoor and outdoor units)
- Super Turbo Start mode
- +8°C Mode (anti-freeze)
- ECO mode
- Independent dehumidification mode
- "Generator" mode (power limitation)
- Light-sensitive night mode
- Timer: 24 hours
- I Feel function
- Blind memory function
- Automatic defrost: Smart Defrost
- Automatic restart after power outage
- Self-diagnosis
- Emergency start button
- Gold coating on the heat exchanger (Titan Gold)
- Low standby power consumption: 1 W
- Cooling temperature range: -15°C ~ +60°C
- Heating temperature range: -15°C ~ +30°C
- Dual condensate drain design
- Left or right drain options
- Carbon-neutral refrigerant with low GWP
- Backlit remote control
- Easy installation and maintenance
- Dimensions (indoor unit HxWxD): 31.3 x 92 x 20.8 cm
- Dimensions (outdoor unit HxWxD): 54.9 x 79.5 x 30.5 cm
- Weight (indoor unit net/gross): 11 / 14 kg
- Weight (outdoor unit net/gross): 23.5 / 26 kg
- Color: White